8-MARK-III

Marvel-8-Mark-III

Product Details

DESCRIPTION

VERTICAL TILT-FRAME SAW

The Worlds Most Popular Vertical Tilt-Frame

  • 5 H.P.
  • 1-1/4″ Blade
  • Marvel Series (8-Mark-III)
  • All-Mechanical Design
  • Cast Iron Construction
  • Metal Cutting
  • Large Adaptable Work Table
  • Semi-Automatic

STANDARD FEATURES

  • SPEED RANGE: 50 – 450 fpm (15 – 137 m/min) infinitely variable with inverter drive
  • FRONT-MOUNTED SPEED CONTROL: Allows blade speed to be adjusted from operator’s control station
  • FEED RANGE: 0-140 lbs (64 kgf) infinitely variable direct reading scale balance beam on the 8-Mark-II. 0-250 lbs (113 kgf) infinitely variable with control on operator’s panel and Automatic Column Return. Column feed is mechanical with Marvel clutch power feed on 8-Mark-III
  • T-SLOTTED WORK TABLE: Work area 24.25″ x 33″; table height 34.5″; four machined T-slots accept 0.625″ T-Bolts on 8-Mark-II. Work area 24.25″ x 33″; table height 38″; two machined T-slots on 8-Mark-III.
  • 0° – 3° CANTED COLUMN: Adjustable 0 or 3° forward approach angle, for notching, or increased efficiency in cutting of structural materials (only available on 8-Mark-III). *8-Mark-II is not adjustable and is available in either 0° or optional 3° cant*
  • MITER CUTTING: Column and blade tilt up to 45° on 8-Mark-II and up to 60° right and left of vertical on the 8-Mark-III. Optional Powered Tilt only available on the 8-Mark-III
  • QUICK-ACTION VISE: Maximum opening 18”. Jaws can be shifted to either right or left side of blade. Jaws are 6” high, 12” wide
  • AUTOMATIC STOPS: Adjustable stops can be pre-set to stop advance and return of blade, and also to stop motor at any location within the 18” travel of the blade (available on 8-Mark-III). *8-Mark-II doesn’t have auto return feature*
  • FLUSHING HOSE: Washes chips from hard to get at places reducing clean-up time
  • POWER CHIP BRUSH: Together with blade wipers and flood coolant deep blade teeth free of chips
  • EAGLE BEAK VTR BLADE: Eagle Beak VTR blade with 3/6 tooth pitch. This is the standard blade that is included with machine purchase