Geka Hydracrop 55 Ironworker Machines
Product Details
2 Cylinders Hydraulic Ironworker machine with 2 Working Areas and 5 workstations.
Hydracrop 55 is a punching, angle cutting and shearing machine that is part of Geka´s two-cylinder Ironworker machines Hydracrop series.
Hydracrop 55 is an Ironworker machine with 2 Cylinders. This means that it can be used by two workers at the same time to complete two different Ironworking tasks such as punching and shearing at once. Hydracrop 55 also has 5 different workstations for each ironworking tasks that it can complete:
- Punching station
- Angle shearing.
- Flat bars shearing.
- Bars cutting.
- Notching.
Hydracrop 55 versions
Hydracrop 55 has 2 versions that differ on the dimensions of its punching throat, these are:
- S Version: 250 mm Standard Throat.
- SD Version: 500 mm Extended Throat.
Hydracrop 55 capacity
Hydracrop 55´s features and capacities can be observed in the following table:
FEATURES | HYDRACROP 55 |
---|---|
Punching Power | 55 Ton |
Maximum capacity | Ø 40 x 10 mm Ø 20 x 20 mm |
Shearing of Angles at 90º | 120 x 120 x 10 mm |
Shearing of Flat Bars | 300 x 15 mm 200 x 20 mm |
Shearing of Round Bars | 40 mm |
Shearing of Square Bars | 40 mm |
Rectangular Notching | 90 x 42 x 10 mm |
Hydracrop 55´s workstations features
Punching Station
Independent guided punching cylinder with anti-rotation mechanism and room for optional or customized tools to be installed.
Flat Bars Shearing Station
Cutting in a progressive manner with minimal distortion. Cutting angles in flat bars station is possible.
Bars Cutting Station
Shearing of solid round and square bars and a variety of profiles, such as UPN, UPE, IPN, and IPE.
Notching Station
Rectangular Notching Station with notching of tubes or triangles as an option.
Angle Shearing Station
Cutting angles without deformation or material loss with a patented rectilinear motion system.