Hydracrop 220, Universal Ironworker with 2 Cylinders and 5 Workstations.

Geka-cizallas-punzonadoras-dos-cilindros-hydracrop-55-1

Product Details

2 Cylinders Hydraulic ironworker machine with 2 Working Areas and 5 Workstations.

Hydracrop 220 is the most powerful machine of the whole Hydracrop series of Geka´s two-cylinder ironworker machines since it has 220 tons punching power. This Hydracrop can shear angle at 90º over material of 205 x 205 x 18 mm. It can also perform cutting and shearing tasks over flat, square and round bars.

This punching, shearing and angle cutting machine has two cylinders: It can perform two ironworking tasks simultaneously.

Hydracrop 220 workstations

Hydracrop 220 has 5 different workstations that can complete different ironworker tasks. These work stations are the following:

  • Punching.
  • Angle cutting and shearing.
  • Flat bars shearing.
  • Bars cutting.
  • Notching.

Hydracrop 220 versions

This punching, shearing, notching and angle cutting machine has two different versions available that are differentiated with the length of their throats:

  • S Version: 385 mm Standard Throat.
  • SD Version: 475 mm Extended Throat.

Hydracrop 220 capacities

Hydracrop 220 capacities are displayed in the following table:

FEATURES HYDRACROP 220/300
Punching Power 220 Ton
Maximum capacity Ø 40 x 40 mm
Shearing of Angles at 90º 205 x 205 x 18 mm
Shearing of Flat Bars 750 x 20 mm
Shearing of Round Bars 60 mm
Shearing of Square Bars 60 mm

Hydracrop 220 features

geka-hydracrop-estacion-punzonado-mesa
Punching Station

Independent guided punching cylinder with anti-rotation mechanism and room for optional or customized tools to be installed.

Geka-cuello-cisne-minicrop-1
Flat Bars Shearing Station

Cutting in a progressive manner with minimal distortion. Cutting angles in flat bars station is possible.

geka-hydracrop-estacion-corte-barras
Bars Cutting Station

Shearing of solid round and square bars and a variety of profiles, such as UPN, UPE, IPN, and IPE.

geka-hydracrop-estacion-punzonado-mesa
Notching Station

Rectangular Notching Station with notching of tubes or triangles as an option.

geka-hydracrop-estacion-corte-angulos-perfiles
Angle Shearing Station

Cutting angles without deformation or material loss with a patented rectilinear motion system.

FEATURES HYDRACROP 55 HYDRACROP 80 HYDRACROP 110 HYDRACROP 165 HYDRACROP 220
PUNCHING
Punching Power 55 Ton 80 Ton 110 Ton 165 Ton 220 Ton
Maximum Capacity with
gooseneck die holder
Ø 40×10 mm
Ø 20×20 mm
Ø 40×14 mm
Ø 24×24 mm
Ø 40×20 mm
Ø 28×28 mm
Ø 40×30 mm
Ø 34×34 mm
Ø 40×40 mm
Throat Depth S/SD 250/500 mm 300/500 mm 300/610 mm 510/610 mm 385/475 mm
Working Height 1085 mm 1095 mm 1165 mm 1110 mm 1110 mm
FLAT BARS SHEARING
Flatbar with slight deformation 300×15 mm
200×10 mm
450×15 mm
300×20 mm
600×15 mm
400×20 mm
750×20 mm
400×30 mm
750×20 mm
400×30 mm
Length of Blades 305 mm 475 mm 605 mm 765 mm 765 mm
Working Height 880 mm 850 mm 960 mm 870 mm 870 mm
ANGLE CUTTING
Shearing Power 1100 kN 1500 kN 1800 kN 3000 kN 3000 kN
L at 90º Shear
without deformation
120x120x10 mm 130×130 x13 mm 152x152x13 mm 205x205x18 mm 205x205x18 mm
L at 45 º 70x70x7 mm 70x70x7 mm 70x70x7 mm 70x70x7 mm 70x70x7 mm
L at 90º Shear
with slight deformation
(optional blade)
130x130x13 mm 152x152x13 mm 160x160x16 mm 205x205x25 mm 205x205x25 mm
SOLID BARS SHEARING
Round Bar 40 mm 45 mm 50 mm 60 mm 60 mm
Square Bar 40 mm 45 mm 50 mm 60 mm 60 mm
UPN Profiles
(optional blade)
120 mm 140 mm 160 mm 180 mm 180 mm
IPN Profiles
(optional blade)
120 mm 140 mm 160 mm 180 mm 180 mm
NOTCHING
Plate Thickness 10 mm 12 mm 13 mm 16 mm 16 mm
L of 100 mm 100 mm 100 mm 120 mm 120 mm
Depth 90 mm 90 mm 90 mm 110 mm 110 mm
Width 42 mm 52 mm 52 mm 58 mm 58 mm
GENERAL SPECIFICATIONS
Motor Power 5 kW 9 kW 9 kW 15 kW 15 kW
Strokes per minute
(on 20 mm. stroke)
37 40 28 31 26
Maximum Stroke 60 mm 70 mm 80 mm 100 mm 100 mm