Geka Hydracrop 110 Ironworker Machines
Product Details
2 Cylinders Hydraulic ironworker machine with 2 working areas and 5 workstations.
Geka Hydracrop 110 is an ironworker machine for punching, shearing, notching and angle, square and round bars cutting tasks. It can be managed by two workers at the same time thanks to its two cylinders. As a result, Geka Hydracrop 110 will save time and increase the efficiency of the user when working with its ironworker.
Geka Hydracrop 110 is part of Geka´s two-cylinder Ironworker machines series called Hydracrop. The five workstations of this ironworker machine are the following:
- Punching
- Angle shearing
- Flat bars shearing
- Bars cutting
- Notching
Geka Hydracrop 110 versions
There are two different versions available in Geka Hydracrop 110 that vary depending on the length of its throat.
2 Punching Throat versions available:
- S Version: 300 mm Standard Throat.
- SD Version: 610 mm Extended Throat.
Geka Hydracrop 110 capacities
The capacities of each main feature within Geka Hydracrop 110 con be observed in the following table:
FEATURES | HYDRACROP 110 |
---|---|
Punching Power | 110 Ton |
Maximum capacity | Ø 40 x 20 mm Ø 28 x 28 mm |
Shearing of Angles at 90º | 152 x 152 x 13 mm |
Shearing of Flat Bars | 600 x 15 mm 400 x 20 mm |
Shearing of Round Bars | Ø 50 mm |
Shearing of Square Bars | 50 mm |
Rectangular Notching | 90 x 52 x 13 mm |
Geka Hydracrop 110 features
Punching Station
Independent guided punching cylinder with anti-rotation mechanism and room for optional or customized tools to be installed.
Flat Bars Shearing Station
Cutting in a progressive manner with minimal distortion. Cutting angles in flat bars station is possible.
Bars Cutting Station
Shearing of solid round and square bars and a variety of profiles, such as UPN, UPE, IPN, and IPE.
Notching Station
Rectangular Notching Station with notching of tubes or triangles as an option.
Angle Shearing Station
Cutting angles without deformation or material loss with a patented rectilinear motion system.