Bendicrop 60 Ironworker Machines for Punching and Bending
Product Details
Sheet metal punching, shearing and bending machine with two cylinders. Universal Hydraulic Ironworker with 6 workstations: Punching, Notching, Shearing Flat Bars, Angle Cutting, Bars Shearing and built-in Bending Station that complies to EC regulations.
Bendicrop 60 is part of Geka´s Bendicrop series of Ironworker machines.
This sheet metal punching, shearing and bending machine is equipped a blade holder with a vertical movement. This punching, shearing and bending machine has a great performance when working with iron, steel or cooper.
Bendicrop 60 is equipped with a touch and cut length stop and it is delivered with two V-shaped bending dies of 40 mm and 70 mm. This sheet metal punching, shearing and bending machine has an anti-torsion system that reduce deformation when shearing flat bars.
Bendicrop 60 workstations
The workstations that are equipped within this sheet metal punching machine are the following:
- Punching station
- Triangular Notching station
- Flat Bars Shearing station
- Angles and Solid Bars Shearing station
- Built-in Bending station
Bendicrop 60 versions
There are 2 punching versions available in this sheet metal punching, shearing and bending machine that vary on the length of the throat.
2 Punching Throat versions available:
- S Version: 250 mm Standard Throat.
- SD Version: 500 mm Extended Throat.
Bendicrop 60 capacities
The capacities of the Bendicrop 60 are in the following table:
| FEATURES | BENDICROP 60 |
|---|---|
| Punching Power | 60 Ton |
| Maximum capacity | Ø 40 x 11 mm |
| Flat bars shearing | 350 x 10 mm (5º) 350 x 15 mm |
| Angle shearing at 90º | 120 x 120 x 10 mm |
| Notching | 100 x 10 mm |
| Bending | 150 x 10 mm |
Bendicrop 60 features
The primary features of this punching, shearing and bending machine are:
Flat Bar Shearing without distortion thanks to its anti-torsion system
Permanent Bending Station complies with CE standards.
Angle section cutting at 45º in its flat bar shearing station.
Minimum deformation when performing angle, rounds, and square bar shearing tasks.
Rectangular Notching with Working Table. Pipe, Tube and triangular Notching is also an option.
Goose neck die-holder that can do punching tasks of UPN and IPN Profiles sections on legs and webs. Quick Punch and Die changing