VT5063MW (2150M)
Product Details
Media
STANDARD FEATURES
- Tilting Column
- For miter cutting up to 60° left and right of vertical. Now with Electronic Tilt, the column is electrically powered with encoder feedback and PC3 touch screen controller for precision miter positioning.
- 0° – 3° Canted Column
- Standard 3° forward approach angle, for increased efficiency in the cutting of structural materials. NOTE: If the non-canted 0° option is required with a 1.25” blade, the VT5063MW (2150M) must be purchased. The VT5063MW (2150M) order must specify that the 1.25” blade is required with the non-canted option.
- Blade Guide
- Patent-pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning design.
- Upper Blade Guide Arm
- Hydraulically positioned and locking, controlled by a selector switch at the operator’s station.
- Flushing Hose
- Washes chips from hard to get at places reducing clean-up time.
- Work-Rest Rollers
- Two turned ball-bearing rollers, one on the entry side and one on the discharge side of the machine bed.
- Vises
- Hydraulic, full stroking with 9-1/2” high x 15” wide 60° faceplates. Removable face plates without tools to allow for both miters and 90° at the blade.
- Automatic Bar Feed
- The patented automatic bar feed design features a 48″ stroke length with indexing speeds of up to 60fpm. The bar feed is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005″ per index. Optional long-stroke shuttles.
- PC3 Programmable Control®
- Provides a Programmable Logic Control Unit with a 12” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library.
SPECIFICATIONS
Model | VT5063MW | |||
---|---|---|---|---|
Cutting Capacity |
Round (Diameter) |
at 0° | 20.0″ | 508 mm |
at 45° | 17.0″ | 432 mm | ||
at 60° | 11.25″ | 286 mm | ||
Rectangle (W x H) |
at 0° | 20.0″ x 25.0″ | 508 x 635 mm | |
at 45° | 20.0″ x 17.0″ | 508 x 432 mm | ||
at 60° | 20.0″ x 11.25″ | 508 x 286 mm | ||
Maximum Vise Opening |
20.25″ | 514 mm | ||
Work Load Capacity | 8,000 lbs | 3,628 kg | ||
Saw Blade |
Dimensions (L x T x W) | 18′ 2″ x 0.050″ x 1-1/2″ | 5537 x 1.3 x 41 mm | |
Blade Speed | 30-500 ft./min by Inverter | 9-152 m/min by Inverter | ||
Tension Control | Hydraulic | |||
Blade Control |
Cutting Control | Direct Force Sensing Electric Ball Screw with PC3 Programmable Control |
||
Blade Feed Force | 0 to 300 lbs | 0 to 1334 N | ||
Vise Operation |
Type | Main Vise (Optional second vise is available to install) |
||
Control | Hydraulic, Full Stroking with 9-12″ High x 15″ Wide 60° Faceplates |
|||
Motors |
Saw Blade | 7.5 HP | 5.6 kW | |
Hydraulic Pump | 5 HP | 3.7 kW | ||
Cutting Fluid Pump | 1/8 HP | 0.1 kW | ||
Tilt Gear | 1/15 HP | 0.05 kW | ||
Power Requirement |
Power Supply Voltage | AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering |
||
Power Requirement | ||||
Cutting Fluid |
Tank Capacity | 60 gal | 227 liters | |
Pump Type | Electric | |||
Hydraulic |
Tank Capacity | 10 gal | 38 liters | |
Chip Disposal |
Manual |
|||
Machine Dimensions (W x L x H) | 94.7″ x 99.2″ x 90.8″ | 2404 x 2518 x 2305 mm | ||
Table Height (Above Floor) | 40.0″ | 1016 mm | ||
Machine Weight | 2,867 lbs | 1,300 kg |
SPECIFICATIONS
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.