NanoJet

NanoJet

The NanoJet is a highly accurate, small-format waterjet cutting machining center, an all-in-one solution, providing accurate, clean, and quiet cutting; while providing maximum uptime, reliability, and predictability. This machine is designed for cutting highly engineered materials where precision and complex geometries are needed. The Nanojet can easily integrate into high output operations utilizing minimal floor space and is engineered to order.

Description

The NanoJet waterjet cutting machining center is an all-in-one solution that provides precise, clean, and quiet cutting. Equally well-suited for cutting highly engineered materials where precision and complexity is required, or demanding 24/7 production environments, the NanoJet provides maximum uptime, reliability, and predictability.

Benefits:

  • Highly precise waterjet solution
  • Fully enclosed system for pristine cutting environment
  • Rapid total part processing
  • Minimal floor space required (small footprint)
  • Engineered to order to meet your application requirements

Specifications

  • Linear Straightness Accuracy: +/- 0.0008 in/1ft [+/- 0.02 mm/0.3 m]
  • Rapid Traverse Maximum: 590 in/min [15,000 mm/min]
  • Repeatability: +/- 0.0004 in [+/- 0.01 mm]
  • Z Axis Travel: 6 in [150 mm]
  • Base: 2 ft [0.65 m]
  • Bridge: 4 ft [1.2 m]
  • Acceleration: 0.1G

Rapid Traverse Maximum: 590 ipm [15 m/min]

Linear Straightness Accuracy: +/- 0.0008 in/1ft [+/- 0.02 mm/0.3 m]

Repeatability +/- 0.0004 in [+/- 0.01 mm]

Linear Straightness Accuracy:+/- 0.0008 in/1ft [+/- 0.02 mm/0.3 m]

Rapid Traverse Maximum: 590 in/min [15,000 mm/min]

Repeatability: +/- 0.0004 in [+/- 0.01 mm]

Z Axis Travel: 6 in [150 mm]

Base: 2 ft [0.65 m]

Bridge: 4 ft [1.2 m]

Acceleration: 0.1G

Core Component Options

Cutting Head Technology
Multiple cutting head options are available on the NanoJet system.

Dynamic Waterjet®
Flow’s patented technology to remove taper, improve accuracy and decrease part cycle time over Standard Waterjet.

Standard Waterjet
Uses garnet abrasive to cut virtually any hard material.

Pure Waterjet
Hair-thin pure waterjet stream ideal for cutting soft materials.

Pump Technology
Each pump can be fully integrated into the NanoJet system.

HyperJet®
6,500 BAR [94,000 PSI]
Provides maximum productivity with continuous operating pressures of 6,000 bar [87,000 psi].

HyPlex® Prime
4,150 BAR [60,000 psi]
The highest pressure, most advanced direct drive pump available today, with pressures rated at 4,150 bar [60,000 psi].

Intensifier
4,150 bar [60,000 PSI]
The longest lasting, lowest maintenance ultrahigh-pressure pump in the industry with continuous operating pressure at 4,150 bar [60,000 psi].

Software Suites
Easy to use Flow software suites allow you to program a part quickly—any material, any thickness.

FlowXpert® 2016
Elite software module that allows you to work more effectively in 3D, with less complexity.

FlowCut™
The control system for Flow waterjet systems that integrates the operation of the ultrahigh-pressure pump, cutting head, and XY cutting table.

FlowPath™
Simply enter basic cutting parameters, such as material type, thickness, and desired edge finish, and FlowPath does the rest.

FlowNest®
A powerful geometric nesting module that allows for small parts to be placed within larger parts.

This website uses cookies and third party services. Ok